| Sign In | Join Free | My burrillandco.com |
|
| Ask Lasest Price | |
| Brand Name : | WELLDONE |
| Model Number : | PZG-(500-12000) |
| Certification : | CE, ISO 9001: 2008, ISO 10004 |
| Price : | 11000 USD to 200000 USD |
| Payment Terms : | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability : | 10Sets/Months |
| Delivery Time : | 30-60Working Days |
Sludge is the industrial waste generated during the production process of the municipal sewage processing. Because sludge has many disadvantages such as high moisture content, high viscosity, high water holding capacity, and low calorific value. It is difficult to achieve industrial utilization. Our Company operated a series of technical researches on currently market situation of sludge treatment and the characteristics of sludge in various regions. Our Company concentrating created a new generation of sludge rotary drum drying system, drying product moisture can be reduced less than 25%, it total achieved the standard of sludge landfill and further incineration processing conditions. The technology of equipment gets absolutely mature enough, also it has stable capacity of operation and very convenient to operate and maintain.
Hollow shaft dense arrangement with the wedge-shaped hollow blade,
the heat medium through the hollow
shaft flow through the blade. The effective volume of heat transfer
area is very large, the heat medium temperature(-40℃~320℃) can be
water vapor, also can be hot water or heat conducting oil.
The heat transfer medium flows through the shell jacket and the
hollow stirring shaft through the rotating joint, and the hollow
stirring shaft has a different internal structure according to the
type of the heat medium to ensure the best heat transfer effect.
In the pulp and jacket access to hot oil, heating at the same time,
the upper part of the is harge port at the same time through the
heated dry air after further drying, thus greatly increasing the
drying strength of the device. Evaporated moisture from the tail
gas out of the dryer, wet air discharged by the induced draft fan
outdoors.
1. Hollow blade dryer low energy consumption: due to indirect
heating, there is no large amount of heat taken away with the air,
the dryer wall is installed the insulation layer, save more energy
than the usual convection drying method.
2. Hollow blade dryer system cost is low: the unit effective volume
has a huge heat transfer surface, to shorten the processing time,
equipment size becomes smaller, it greatly reduces the building
area and building space.
3. A wide variety of process problems can be solved by using any
kinds of heating source. It is especially suitable for drying heat
sensitive materials and light temperature materials. The normal
heat transfer medium can be steam, heat transfer oil, hot water, as
well as cooling water etc... The dryer can be used for continuous
or batch processing. It has been widely used in many industry areas
already.
4. Small environmental pollution: do not use air with dust
material. Material solvent evaporation is very small, easy to
handle. For the pollution of the material or the need to recover
the solvent conditions, can be used the closed circuit.
5. Low operating costs: normal operation of the device, only 1
hour/day. Low-speed mixing and reasonable structure. Wear rate is
very low, and maintenance costs are also very low.
6. Stable operating continuously: Because of the special
compression and inflation of the agitation function of paddle
dryer, the material grains touch the heat-transfer area thoroughly.
Within the axis direction, the temperature, moisture, mixture, and
grades of the materials is very small so as to guarantee the
stability of the whole process.



Picture of Environmental Friendly Energy Saving Rotary Vacuum Paddle Dryer in Working







|